Quick answer
Fix the water first. EPA says you can often clean up a small area of less than about 10 square feet yourself, unless you have health concerns or there’s sewage or contaminated water involved. For larger or hidden problems, get a written scope, and consider an independent test for bigger disputes or a home purchase.
Companies to compare:Central Oregon Disaster Restoration, Masters of Disaster, Mountain Air Restoration, Rainbow Restoration of Central Oregon, SERVPRO of Bend, Porch Light Property Inspection, TurnKey Property Inspections.
Bend mold companies to compare
The list is split between restoration companies and independent inspectors. All are alphabetical within their groups. Inspectors listed here can give you a look from someone not bidding on the cleanup.
Company details were reviewed in October and November 2026. License numbers are shown as the company publishes them or as they appeared in state records at that time. Services, staff and license status change, so confirm what matters directly and in writing.
Central Oregon Disaster Restoration
Based in: Serves Bend and Central Oregon
Phone: 541-318-7853
Services advertised: Mold removal, water and fire damage restoration, crawl space water damage, and asbestos and lead services
Potential fit: Mold tied to a water loss, where asbestos or lead in older materials may also be a concern.
Ask about: Its CCB number, and who performs any asbestos or lead work.
Masters of Disaster
Based in: Serves Bend, Redmond and Central Oregon
Phone: 541-480-2225
Services advertised: Mold remediation, water and fire restoration, structural repairs and insurance claim support
Potential fit: A loss with an insurance claim and rebuild work.
Ask about: Its CCB number, and how it documents scope for the insurer.
Mountain Air Restoration
Based in: Bend (715 SE Business Way)
License: CCB 196057
Phone: 541-725-0001
Services advertised: Mold evaluation and testing, remediation, crawl space encapsulation, water damage and repairs
Potential fit: Crawl space or attic mold from a local company built around moisture problems since 2007. It also lists service for failed home inspections.
Ask about: Because it both tests and cleans, whether you can use a separate clearance test.
Rainbow Restoration of Central Oregon
Based in: Redmond; serves Bend
Phone: 541-504-3338
Services advertised: Mold removal, water restoration, reconstruction and air duct cleaning, with 24/7 service
Potential fit: Mold alongside a recent water event, or when you need rebuilding from the same company.
Ask about: Its CCB number, and how quickly it can begin drying.
SERVPRO of Bend
Based in: Bend (90 SE Bridgeford Blvd)
License: CCB 243501
Phone: 541-385-7044
Services advertised: Assessment, containment, air filtration, remediation and repairs, with 24/7 emergency service
Potential fit: A large water loss where a bigger crew and an after-hours response matter.
Ask about: The specific containment plan and a written scope with your insurer, if there’s a claim.
Porch Light Property Inspection
Based in: Bend
License: OCHI 1763
Phone: 541-408-8588
Services advertised: Mold air sampling, thermal imaging and home inspections
Potential fit: An independent look at a suspected problem, with a third-party lab involved.
Ask about: What sampling can and can’t show, and how the results will be explained.
TurnKey Property Inspections
Based in: Bend
Phone: 541-588-2002
Services advertised: Mold and air quality testing, pest and dry rot checks, radon and re-inspections
Potential fit: A check by someone not bidding on the cleanup, or a re-inspection afterward.
Ask about: Who the assigned inspector is, and their OCHI number.
Why Bend homes get mold
- Vented crawl spaces: torn vapor barriers, wet soil, plumbing leaks and poor drainage can all feed mold under the floor. Fallen insulation can make things worse. Our insulation guide covers the repair side.
- Attics: bath fans venting into an attic and warm air leaks can lead to frost, then moisture, on the underside of the roof deck during cold spells.
- Leaks: supply lines, water heaters, roof flashing and failed gutters are common sources. See our guides to plumbers, roofers and home drainage.
- Frozen pipes: a winter burst can soak walls for days before it’s found in a second home. Our winterization guide covers prevention.
Clean it yourself or call someone?
EPA’s guide says you can generally handle areas under about 10 square feet yourself, if you fix the water problem first. Scrub hard surfaces with detergent and water, and dry them fully. Throw out absorbent materials that are moldy, and wear an N-95 respirator, gloves and goggles.
Call a professional when:
- The area is large, or hidden inside walls or HVAC ducts.
- Sewage or contaminated water caused it.
- Someone in the home has asthma, a weakened immune system or a health concern. Talk to a doctor in that case too.
- You’re dealing with a buyer, insurer or a dispute that calls for documentation.
- Old building materials might contain asbestos or lead, in which case don’t disturb them until they’re tested.
Testing and the conflict of interest
EPA says sampling usually isn’t needed when you can already see mold, because the plan is the same: fix the moisture and remove it. There are also no federal limits on what level of mold is “acceptable.” Air tests can help with hidden problems, disputes or a check after cleanup, but a single lab number shouldn’t scare you into a big project.
When a company offers both the test and the fix, it has a stake in the result. Hiring an independent inspector for bigger projects is one way to keep things straight. At a minimum, ask what specifically will change your cleanup plan, and how success will be measured when the job is finished.
What a good remediation includes
- A named moisture source, and who is fixing it
- Containment, with negative air and HEPA filtration where it’s warranted
- Specific materials to be removed, and how the remaining ones are cleaned
- Drying targets and how they’re measured
- Rebuild scope, stated separately from cleanup
- Photos of the work before areas are closed up
- Clear criteria for finishing the job
Be careful with fogging or coating that’s presented as the entire solution. Ask for IICRC training or similar credentials, verify the CCB license and see our water damage cost guide for how to look at separate line items.
How to get comparable quotes
Prices vary widely by location, access and materials, so we don’t publish an average. Ask each company for a written scope showing:
- Moisture source, and who’s fixing it
- Affected areas and square footage
- Containment and air filtration
- Materials to remove, with disposal
- Cleaning method and products
- Drying and clearance criteria
- Rebuild pricing, listed separately
- Asbestos or lead testing on older materials
- Warranty and exclusions
- Insurance paperwork, if applicable
Our contractor bid comparison checklist gives you a simple way to line those details up side by side.
Red flags
- No moisture source identified
- Fear-based selling, or a quote based on one air sample
- A demand to sign an insurance assignment on the spot
- Fogging or coatings offered in place of removal
- Vague wording, such as “treat all affected areas”
- No containment on a large job
- Refusal to allow independent testing
Common questions
Do I need a professional for a small patch of mold?
Often not. EPA says you can generally clean less than about 10 square feet yourself if you fix the moisture, unless health concerns or contaminated water are involved.
Should I have mold tested?
EPA says sampling is usually unnecessary when mold is visible. Testing can help with hidden problems, disputes or a check after cleanup. Ask how the results would change your plan before you pay.
Can mold be an issue in dry Central Oregon?
Yes. Leaks, crawl space moisture, poor attic ventilation and burst pipes can all create moisture regardless of the outdoor climate.
What should a buyer do if an inspection finds mold?
Get the moisture cause and scope documented in writing, and an estimate from a qualified company. Work with your agent during your inspection period. Consider an independent follow-up on a larger issue.
Is the same company allowed to test and clean?
Often yes, and some do both. Ask how they handle the potential conflict of interest, and consider independent testing for larger projects.
Official sources & further research
For rules, licensing and local programs, use the current primary source before making a decision.